Borewell Calculators

Free · English and ಕನ್ನಡ

Borewell Calculators

Free tools for farmers and dealers: find how much HP motor your borewell needs, the right submersible cable size, and the BTCO starter that stops your motor from burning.

Which calculator do I need?

The right motor, cable and starter stop motor burning

Most burnt submersible motors come down to three things: a motor that pumps the borewell dry, a cable that is too thin, and a starter that does not stop the motor in time. A motor too big for the borewell runs dry; a thin cable gives the motor low voltage so it runs hot. Read why submersible motors burn.

Every BTCO starter has dry run protection, overload protection and single phasing protection, so the motor is stopped before it burns.

Frequently asked questions

Is there a borewell motor calculator?

Yes. The borewell motor HP calculator on this page takes the pump depth in feet and the inches of water, and shows how much HP motor is required. It is free and works in English and Kannada.

How do I find the right cable size for my submersible pump?

Use the submersible cable size calculator: choose the motor HP and enter the pump depth. It shows the cable size in sq mm and how much cable to buy.

How many litres is 1 inch of borewell water?

About 600 litres an hour. 2 inches is about 3,400 litres an hour and 3 inches about 9,300 litres an hour. The HP calculator page has the full table.

Which starter do I need for my borewell motor?

The starter finder asks a few simple questions (power supply, motor HP, single or double cable) and shows the right BTCO starter. Every BTCO starter has dry run, overload and single phasing protection to stop the motor from burning.

Please note: the calculators give approximate values, not exact ones. They are general information, not a BTCO recommendation. Please contact your motor dealer for values made for your borewell before you buy.